|
Displaying 1 to 6 (of 11 products) |
Result Pages: 1 |
16,97€
Fast-setting, solvent- and filler-free two-component epoxy resin adhesive.
Mixing ratio: 1 : 1 parts by weight / volume of resin to hardener.
Processing time: 10 minutes.
Loads can be applied to the bond after only 60 minutes.
* Good bond strength
* Tough-hard formulation
* Grind...
Model : |
1551121 |
Manufacturer : |
CN GERMANY |
Weight : |
0.00 |
|
|
|
23,69€
Fast-setting, solvent- and filler-free two-component epoxy resin adhesive.
Mixing ratio: 1 : 1 parts by weight / volume of resin to hardener.
Processing time: 30 minutes.
Loads can be applied to the bond after only 240 minutes.
* Good bond strength
* Tough-hard formulation
* Grin...
Model : |
154300-2 |
Manufacturer : |
CN GERMANY |
Weight : |
0.00 |
|
|
|
17,85€
Fast-setting, solvent- and filler-free two-component epoxy resin adhesive.
Mixing ratio: 1 : 1 parts by weight / volume of resin to hardener.
Processing time: 5 minutes.
Loads can be applied to the bond after only 10 minutes.
* Good bond strength
* Tough-hard formulation
* Grinda...
Model : |
1551001 |
Manufacturer : |
CN GERMANY |
Weight : |
0.00 |
|
|
|
19,29€
Identical with Epoxy Adhesive E
Processing time: approx. 90 minutes (mixing ratio 1 : 1 = 100 : 100 parts by weight)
Processing time: approx. 120 minutes (mixing ratio 2 : 1 = 100 : 50 parts by weight)
Curing time: 24 hours cold curing.
* High bond strength
* Tough-hard formulation
...
Model : |
1581001 |
Manufacturer : |
CN GERMANY |
Weight : |
0.00 |
|
|
|
5,50€
Application:
Manufacture of light, nonrun adhesive, pourable moulding compound and coupler coatings for mould construction, using a mixture of 50 volume percent glass fibre cuttings and 50 volume percent cotton flocks. Cotton flocks are use for enhanced dimensional stability in moulded products, in...
Model : |
2101150 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
17,50€
General information about the system "Epoxy resin L" with hardeners S, L, EPH 500 and EPH 161.
Low viscosity, free of solvents and fillers.
Fast impregnation of glass, aramid, and carbonfibres.
High static and dynamic strength.
Epoxy resin L with the corresponding hardeners S, L, EPH 500 and EPH...
Model : |
1001151 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
Displaying 1 to 6 (of 11 products) |
Result Pages: 1 |
|
|
|