|
Displaying 7 to 11 (of 11 products) |
Result Pages: 2 |
17,50€
General information about the system "Epoxy resin L" with hardeners S, L, EPH 500 and EPH 161.
Low viscosity, free of solvents and fillers.
Fast impregnation of glass, aramid, and carbonfibres.
High static and dynamic strength.
Epoxy resin L with the corresponding hardeners S, L, EPH 500 and EPH...
Model : |
1001300 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
6,65€
Technical data:
Fibre type: E-Glass.
Shape in section: Round.
Fibre coarseness: 9–14 µm.
Length: 3 mm ± 5 mm.
Specific gravity: 2.53–2.55 g/cm³.
Resistance to dry heat: ca. 315 °C.
Softening temperature: approx. 840 °C.
Moisture content on delivery: max. 0.3 %.
Colour: White.
Surface treat...
Model : |
2101001 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
12,76€
2-component quick-curing adhesive (resin, powered hardener). Initial bonding strength after 20 min., fully cured after approx. 1 hour. High tensile and shearing Bonds all metals, many plastics, wood, glass, porcellain etc. Incompatible with polystyrol (such as Styropor)....
Model : |
96030 |
Manufacturer : |
GRAUPNER |
Weight : |
370.00 |
|
|
|
7,95€
Glass Bubbles (hollow micro glass balls) consist of a water-insoluble, chemically stable borosilicate glass of low-alkali content, they are used as light filling material for mixing light filler, adhesive and moulding compound.
• Yields lightweight filling compouds.
• For epoxy, polyester, and vin...
Model : |
210125PA2 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
10,95€
• Yields thixotropic filling compouds and gelcoats.
• For epoxy, polyester, and vinyl ester resins.
Thickening agent for resins.
Amount required: 0.5–5 percent in weight.
The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The c...
Model : |
2101201 |
Manufacturer : |
R&G GmbH |
Weight : |
0.00 |
|
|
|
Displaying 7 to 11 (of 11 products) |
Result Pages: 2 |
|
|
|