|
Displaying 1 to 6 (of 34 products) |
Result Pages: 1 |
8,50€
Kavan aileron control link M3...
Model : |
0071 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
7,30€
Alloy REINFORCED E-Prop Spinners for motor safth 5 mm.
When selecting a size, note that the smaller diameter is the motor shaft and the larger is the popeller shaft diameter....
Model : |
54802503 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
12,50€
An electric starter or backfiring 4-stroke engine will not loosen this Spinner Nut. Simple to install, hold the Spinner Nut with a 22 mm (7/8") wrench and then tighten the socket set screw against the shaft. Required but not included: hex wrench.
Engine Shaft: 1/4-28"
Hex Wrench: 4mm. (5/32 in)....
Model : |
0294 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
12,50€
An electric starter or backfiring 4-stroke engine will not loosen this Spinner Nut. Simple to install, hold the Spinner Nut with a 22 mm (7/8") wrench and then tighten the socket set screw against the shaft. Required but not included: hex wrench.
Engine Shaft: 3/8-24"
Hex Wrench: 4mm. (5/32 in)....
Model : |
0300 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
12,50€
An electric starter or backfiring 4-stroke engine will not loosen this Spinner Nut. Simple to install, hold the Spinner Nut with a 22 mm (7/8") wrench and then tighten the socket set screw against the shaft. Required but not included: hex wrench.
Engine Shaft: 5/16-24"
Hex Wrench: 4mm. (5/32 in)...
Model : |
0295 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
12,50€
An electric starter or backfiring 4-stroke engine will not loosen this Spinner Nut. Simple to install, hold the Spinner Nut with a 22 mm (7/8") wrench and then tighten the socket set screw against the shaft. Required but not included: hex wrench.
Engine Shaft: M8 x 1.25.
Hex Wrench: 4mm. (5/32 i...
Model : |
0298 |
Manufacturer : |
KAVAN |
Weight : |
0.00 |
|
|
|
Displaying 1 to 6 (of 34 products) |
Result Pages: 1 |
|
|
|