Bellcrank size 2" (25.4 mm.) Between lines, with built-in bearing that gives it a smoothness and excellent control precision, for racing models or demanding drivers. Manufactured in Duralumin and cut by Laser. Specifications: Thickness: 1.5 mm. Material: Duralumin Bearing: 3 mm shaft. Height 4 ...

Bellcrank size 2" (25.4 mm.) Between lines, Manufactured in Duralumin and cut by Laser. Specifications: Thickness: 1.5 mm. Material: Duralumin Line holes: 1.5 mm. Shaft hole: 3 mm. Transmission holes: 2 mm. Distance between lines: 2 "(25.4 mm.) Distance between axis and transmission holes:...

Support for bellcrank in 1.5 mm Duralumin. of thickness, cut to Laser. For line control models where balacin support is required, for example in models with solid balsa wood wings (Montjuic type or similar). Specifications: Size: 35 x 55 mm. Height: 15 mm. Distance to the shaft hole: 28 mm. Ho...

Tank for acrobatic control line "dog house type", manufactured in tin plate iron to avoid corrosion, welded by hand with tin / silver and tested 100% hermetic, made to measure on request, the tubes are made of brass , consists of 3 tubes, filling, venting and aspiration of fuel, the arrangement of t...

Cables (Lines) for control line in 0.3 Ø mm. piano wire. roll of 16 mts.x2, for models up to 0.25 (3.5 cc.). Specs: 0.3 mm thick steel piano wire. Breaking force: 18 Kgs....

Cables (Lines) for control line in 0.4 Ø mm. piano wire. roll of 16 mts.x2, for models up to 0.60 (10 cc.). Specs: 0.4 mm. thick steel piano wire. Breaking force: 32 Kgs....