Elapor foam to resist damage.
White in color.
Wings: Two piece with fiberglass wing joiner.
Spinner: Elapor foam 2.2" (55mm) diameter.
Aileron Control: Dual servo.
"Full House" Control Surfaces: Elevator, Rudder and Ailerons.
One (1) Multiplex Easy Glider Pro with decal sheet, foam spinner, wing joiner, pushrods, hardware and illustrated instruction manual.
News in the model version 4:
• Both ailerons can be deflected up as a landing aid.
• Detachable wings, fin and tailplane for ease of transport.
• Ample space in the fuselage permits the use of a.
wide range of battery sizes.
• Coloured canopy for convenient battery swapping.
Radio System: 4-channel (min) with micro receiver
Easyglider Pro Tuning Set: MPX332650
An outstanding power set for the experienced, demanding RC pilot. Current drain with 2S LiPo and supplied propeller: approx. 32 A.
Servos: Two (2) micro size for elevator & rudder Two(2) nano size for ailerons
Servo Extensions: Two 16" (200mm) for aileron servos Y Harness: For aileron servos
Battery: at least 2200mAh.
Battery Charger: LiPo compatible.
If building as glider only the following items are required;
NiMh Receiver Battery (at least 1800mAh)
Switch Harness with Charge Jack
Wingspan: 71" (180.3cm)
Length: 43.7" (112.3cm)
Flying Weight: 28.5oz (810g) with standard power system
Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system
Wing Area: FAI approx. 226 sq in (41.6g/sq dm)
Airfoil: Semi symmetrical
CG (centre of gravity): 2.7" (70mm) from leading edge at wing root
measured at fuselage side.